Midland Flake Epoxy
Flake epoxy is the West Texas workhorse floor: durable, attractive, hides minor concrete imperfections, and installs in a single day. Midland garages, basements, workshops, and pole barns all benefit from a quality flake-epoxy build. Steadfast installs flake epoxy across Midland and Midland County with polyaspartic topcoats that handle Texas heat, oilfield dust, and daily wear.
Midland Flake Epoxy Floor Installation
Vinyl flakes serve two purposes in Midland flake epoxy: aesthetic (visual texture, color depth, pattern) and structural (slip resistance, surface profile that diffuses scratches and wear). Standard flakes are 1/4-inch chips broadcast into wet epoxy at full coverage. The flakes embed at random angles, creating a textured surface that hides minor concrete imperfections, scratches that develop over time, and slight color variations.
Full broadcast (saturate the wet epoxy with flakes until they will not absorb more) is the standard for Midland garages. Partial broadcast (60 to 75 percent coverage with visible epoxy color showing through) is the choice for basements, workshops, or commercial spaces where the homeowner wants more of the base color visible. Both finish with polyaspartic clearcoat. Full broadcast costs about 10 percent more in flake material.
Flake Density: Partial vs Full Broadcast
Most Midland homeowners choose neutral flake colors: gray, beige, brown, or tan blends. These match most home exteriors and resell well. Bold colors (red, blue, copper, bronze) are popular for personal showcase garages but can hurt resale appeal. Custom blends are available with 5 business day lead time. Sample boards always shown before commit.
Midland Flake Epoxy Cost and Schedule
Midland flake epoxy 2-car garage runs $2,200 to $4,500 installed. Basement floors $5 to $9 per sq ft. Workshops vary by size and prep needs. Schedule: 1 to 2 days. Day 1 prep, prime, body coat, flake broadcast. Day 2 polyaspartic topcoat (if not done same-day with rapid-cure system). Drive-on: 72 hours after final coat for vehicle traffic.
Ready for Midland flake epoxy floors?
Call us, send a message, or browse our gallery to see real Midland projects.
Midland Flake Epoxy FAQ
Midland Flake Epoxy: How much does flake epoxy cost?
Standard flake-and-polyaspartic 2-car Midland garage: $2,200 to $4,500. Basement floors $5 to $9 per sq ft. Workshops vary by size and prep complexity.
Midland Flake Epoxy: Can I install over old garage paint?
No. Old garage paint must be ground off. Adhesion failures from coating-over-paint are why we never do it. Diamond grinding is part of every Midland install.
Midland Flake Epoxy: Will it crack in West Texas heat?
Properly installed polyaspartic-topcoated flake epoxy handles Midland temperature swings. Cracks come from concrete movement (slab issues), not coating failure. Pre-existing concrete cracks are filled with polyurea before primer to prevent telegraphing through the coating.
Midland Flake Epoxy: How thick is the floor?
Full system is 25 to 30 mils dry-film thickness. About the thickness of a credit card. Doesn't affect garage door clearance or threshold heights. Floor reads flush with surrounding concrete (unless you choose a built-up edge for showroom application).
Midland Flake Epoxy: Cleaning?
Sweep regularly. Dust mop. Wet-mop with mild soap and water for spills. No solvents, no abrasive scrubbers. Basic care extends life 50 percent.
Other Midland Concrete Coatings Services
View all Midland, TX services · See our work · Get a free estimate
Service Area: Midland, TX
We serve all of Midland, TX and surrounding Midland County neighborhoods.