Skip to content
Who We Are

West Texas’s Trusted Coating Crew

Steadfast Concrete Coatings is a locally owned and operated company based in Odessa, TX. Owner-involved, communication-first, and built on the belief that proper prep is what separates a floor that lasts from one that fails.

Odessa, TX
Our Story

Built On Honest Work

Some businesses find their identity by pointing at what’s broken. We found ours by deciding what excellent looks like and never moving off it.

Proper surface prep to the right concrete profile. Materials we stand behind without hesitation. Real cure times, no shortcuts. And straight communication with every customer, from the first phone call to the final walkthrough.

That standard has earned us the trust of general contractors, facility managers, and homeowners across West Texas who’ve already learned that cutting corners costs more in the long run. They come to Steadfast because they want it done right the first time, and they know we deliver.

Commercial. Industrial. Residential. The project changes. The standard doesn’t.

“Good enough for someone else doesn’t even hit the bare minimum standard of Steadfast Concrete Coatings.”Our Promise
What Drives Us

Four Things We Don’t Compromise On

Every floor we install passes through these four standards. Skip one and the floor doesn’t hold up. We’ve watched competitors skip them and pay the price in warranty claims. We don’t.

01

Surface Preparation Is Everything

Concrete prep accounts for roughly 70 percent of whether a coating lasts. We mechanically grind every floor to the correct CSP profile, repair cracks and pitting, and shot-blast where the substrate demands it. Skipping prep is the most common reason coatings fail in West Texas, and the most common shortcut taken by lower-bid installers.

02

The Right System for the Application

An oil-field shop floor doesn’t need the same coating as a residential garage. A polished concrete commercial space doesn’t need the same buildup as a metallic decorative installation. We spec the system based on the environment, traffic load, chemical exposure, and aesthetic goals, not on what’s cheapest to install.

03

Communication Through Every Phase

You hear from us before, during, and after the job. We send photos throughout the install so you know what’s happening even when you’re not on site. If something changes, you’ll know about it the same day. No surprise change orders, no radio silence after we get a deposit.

04

Owner-Involved On Every Project

The owner of Steadfast is on every job, from the first walkthrough to the final inspection. That’s not a marketing line, it’s the operating model. When you call, you reach a tradesman who’s been on hundreds of West Texas floors. When something needs a decision, it gets made by someone who can actually make it.

Owner-Operated
Steadfast Concrete Coatings

Steadfast is owner-operated and the standard for the company comes directly from the man running it. Every estimate, every prep, and every walkthrough involves the owner directly. You won’t get handed off to a sales rep, a project manager, or a call center.

“If I wouldn’t put it in my own garage, it’s not going in yours.”
Why Owner-Involvement Matters

You Get The Standard-Setter, Not A Subcontractor

A lot of coating companies grow by hiring crews and stepping back. The standard slips. Customers stop talking to the person who made the original promise. Quality drifts toward whoever happens to be on the truck that day.

Steadfast is run differently. The owner is hands-on through every project, which means the company can only grow at the speed quality allows. That’s intentional. We’d rather do twenty jobs a year right than two hundred a year wrong.

  • Direct phone access to the owner during the project
  • Owner walks every estimate and writes every scope
  • Final inspection done with the owner before final payment
  • Warranty calls go straight to the owner, not a service desk
  • Same standard on a residential garage as an oil-field shop
How We Work

The Steadfast Approach

Three things define every project we take on. They sound simple. Doing all three on every floor is what separates a coating that lasts from one that fails before the next change in season.

01 Prep

Mechanically Profiled Concrete

We grind to the correct CSP for the system being installed, never chemical-etch and call it good. The right profile means deep mechanical bond, not surface adhesion. That’s why our floors don’t peel.

02 Apply

Proper Cure Times, Every Coat

Epoxies need 8 to 12 hours to cure between coats for full resin penetration. Polyaspartics cure faster but need correct temperature windows. We follow the spec sheet, every time, no matter the schedule pressure.

03 Verify

Walked And Documented

Every job ends with a final walkthrough alongside you. We don’t collect the remaining 50 percent of the project until you’ve signed off. You get photo documentation of the prep and install for your records.

Ready For A Floor That Lasts?

Get a free estimate from the owner himself. We’ll walk your space, give you honest recommendations on the right system, and tell you what it actually costs.

Schedule My Visit → Or call: (432) 222-3323
FAQ

Common Questions About Working With Us

Have a question we didn’t cover? Reach us at /contact or call (432) 222-3323. View completed projects on our gallery.

How long has Steadfast been operating in West Texas?
Steadfast Concrete Coatings has been operating in Odessa, TX since 2024. While the company is relatively young, the owner brings significant trade experience and the company has earned strong relationships with general contractors across the Permian Basin in that time.
Do you handle commercial and residential, or just one?
Both. We work with general contractors, facility managers, oil-field shop owners, and homeowners. The standard of work doesn’t change based on project size. A residential garage gets the same prep, materials, and attention as a commercial warehouse.
Are you licensed and insured?
Yes. Steadfast carries general liability and workers comp insurance. We can provide certificates of insurance to general contractors or facility managers prior to mobilization. Just ask during the estimate and we’ll send them over.
What areas do you serve?
We’re based in Odessa, TX and primarily serve the Permian Basin including Odessa, Midland, Big Spring, Andrews, Monahans, Pecos, Lamesa, and Seminole. For commercial work, we’ll travel further. Call us with your location and we’ll give you a straight answer on whether we cover it.
Why does prep matter so much for an epoxy coating?
Concrete prep determines roughly 70 percent of how long a coating lasts. The coating bonds mechanically to the concrete pores opened up during grinding. Skip the prep or use a chemical etch instead, and the coating only bonds to the surface. That’s why peeling and delamination happen, almost always within the first 12 to 24 months.
What sets you apart from other coating companies in the area?
Three things. First, owner-involvement on every job, no subcontracted crews. Second, we don’t shortcut prep or cure times no matter what the schedule looks like. Third, communication, you’ll hear from us during the install with photos and updates.
Do you offer financing?
Yes. We work with financing partners who can approve qualified residential customers without impacting their credit score. Application is fast and approval comes back within hours in most cases. Ask about it during the estimate.
Call Now Schedule a Visit